文章摘要
刘跳民,甘凤伟,李锋,刘杰,底衡波,杨逸帆,钱书伟.刻槽纠斜钻具在湖南怀化火车西站非开挖水平孔中的应用[J].矿产勘查,2018,9(4):714-719
刻槽纠斜钻具在湖南怀化火车西站非开挖水平孔中的应用
Application of drilling tools of deviation correction for trenchless horizontal boreholes in the western railway station in Huaihua City, Hunan
投稿时间:2018-04-24  
DOI:
中文关键词: 非开挖  水平孔  纠斜  刻槽  钻具
英文关键词: trenchless,horizontal borehole, deviation correction, notch groove, drilling tool
基金项目:
作者单位
刘跳民 有色金属矿产地质调查中心,北京 100012 
甘凤伟 北京矿产地质研究院,北京 100012 
李锋 北京中色资源环境工程股份有限公司,北京 100012 
刘杰 中色地科矿产勘查股份有限公司,北京 100012 
底衡波 中色地科矿产勘查股份有限公司,北京 100012 
杨逸帆 中色地科矿产勘查股份有限公司,北京 100012 
钱书伟 有色金属矿产地质调查中心,北京 100012 
摘要点击次数: 1474
全文下载次数: 842
中文摘要:
      在非开挖水平孔的施工中,当钻具由松散地层进入完整硬岩地层时,如果遇层角小,钻孔很容易沿接触面滑行而发生钻孔上漂。因为松散地层对钻具的约束力太小,这类钻孔的纠斜没有很好的解决办法。文章介绍了刻槽纠斜钻具及纠斜方法,在怀化火车西站非开挖水平孔的施工中发挥了很好的作用。钻具主要由岩芯管、加重块和大出刃平底刀片组成,加重块在重力作用下迫使钻具下沉起到部分纠斜作用;大出刃刀片在回转力和加重块重力的作用下在钻孔下邦的岩石上刻槽使钻具下沉,进一步增大纠斜量,二者配合产生很好的纠斜效果。通过多次刻槽使钻孔逐步下移,达到纠斜的目的。
英文摘要:
      When the drilling tool pass through loosen formation to the hard-rock stratum, if the dip angle becomes smaller, the trenchless horizontal borehole is easily deviated along the stratum boundary. Considering that the loose formation has little binding force on the drilling tool, there is no proper solution to deviation correction. This paper will introduce the authors' innovation of the drilling tool and method of notch groove for deviation correction, which have played an effective role in trenchless horizontal borehole in Western Railway Station of Huaihua City, Hunan Province. The drilling tool is mainly composed of the core barrel, the weighting block and the full exposure flat-bottom blade. Firstly, with gravity, the weighting block forces the drilling tool to sink down words, which partially leads to deviation correction.Secondly, with gyroscopic force and gravity, the full exposure flat-bottom blade notches groove at underlying hard-rockalso forces the drilling tool to sink down, which will increase the deviation correction. Therefore, the combination of using the above two solutions could make much better effect on correcting the deviation. It has been concluded that repeating the notch grooves could cause the drilling holes move downward gradually to correct the deviation.
查看全文   查看/发表评论  下载PDF阅读器
关闭