| 王斌峰,李海光,尹冰一,吴晗,李瑞娜.对固体矿产勘查地质资料综合整理技术要求的商榷[J].矿产勘查,2025,16(S2):313-317 |
| 对固体矿产勘查地质资料综合整理技术要求的商榷 |
| Discussion on technical requirements for the comprehensive collation of geological data for solid mineral exploration |
| 投稿时间：2025-07-01 |
| DOI：10.20008/j.kckc.2025s2041 |
| 中文关键词: 固体矿产勘查 规程 商榷 |
| 英文关键词: solid mineral exploration work procedures discussion |
| 基金项目: |
|
| 摘要点击次数: 43 |
| 全文下载次数: 25 |
| 中文摘要: |
| 2020年度由自然资源部批准修改后的《固体矿产勘查地质资料综合整理综合研究技术要求( DZ/T 0079-2015)》中，现发现有多处需完善处。较典型的有:推荐的岩、矿层真厚度的公式是一个不完全可正确计算 其真厚度值的公式；钻探单工程厚度计算公式中，把相邻且互为余角的两个夹角定义成“或 ”的关系来使用；此外还存在有多处专业术语需调整等有待商榷之处。本文对这些问题进行了商榷，提出了相应的改 进使用建议。 |
| 英文摘要: |
| In 2020，the Ministry of Natural Resources approved its revised“Technical requirements of integrated compilation and study on geological data about solid mineral exploration(DZ/T 0079-2015)”，and it is found that there are a number of errors in negligence. More typical are:The recommended formula for the true thickness of rock and mineral layers is an incomplete formula that cannot accurately calculate its true thicknessvalue；In the drilling single engineering thickness calculation formula，the two adjacent angles that are mutually complementary are incorrectly defined as a "or" relationship；In addition，There are several issues with profes. sional terminology errors. In this paper，the mistakes found in the paper are discussed one by one，and finally cor. responding suggestions for improvement are put forward. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |